Multi Jet Fusion
Multi Jet Fusion is a powder-based technology but does not require lasers. The powder bed is heated evenly from the start. A thermally conductive liquid is injected when particles need to be selectively melted, and a thermally inhibiting liquid is injected around contours to ensure sharp edges and good surface quality. As lamps are moved across the surface of the powder bed, the injected material dims the heat and aids in even distribution.
Infrared lamps are used as the energy source for the MJF, which continuously illuminate the print surface. The powder particles to be fused are wetted with a thermally conductive liquid via the print head. The particles absorb the heat from the lamps and fuse with each other and with the underlying layer. To prevent the powder particles from fusing together beyond the intended area, a heat-inhibiting liquid is applied around the contour of the component at the same time. In this way, the 3D object gets an even and smooth surface.
Multi Jet Fusion uses a fine-grain PA 12 material that allows thin layers of 80 microns. This creates parts with high density and low porosity compared to parts made with laser sintering. Also, it requires minimal finishing. This shortens lead times, which is ideal for functional prototypes and short runs of ready-to-use parts.
Prototypes with mechanical properties comparable to those of injection molded parts
Series of small components as a cost-effective alternative to injection molding
Personalized manufacturing, the economical production of unique, complex designs that are manufactured only as single items or in small batches
Lightweight constructions with complex lattice constructions
± 0,2 mm
Depending on the project, the accuracy can still be improved.
380 x 280 x 380 mm
Unfinished parts have a soft finish with no visible layers, but they can be sandblasted and stained
Minimum Wall Thickness
1 mm (at hinges 0,5mm)
PA 12 (Polyamides)
Together we will find the right technology for the implementation of your components.